Products: Moisture Remediation & Alkalinity Control

Are You Accurately Mitigating Concrete Moisture Intrusion? Tips to Master the Installation of VaporSolve

Excessive concrete moisture intrusion can be a coating contractor’s worst enemy – yet this enemy can be tamed. In How to Test for Excessive Concrete Moisture, I explained how the two most common moisture testing methods – Calcium Chloride (CaCL) Moisture Testing per ASTM 1869 and Relative Humidity (RH) Testing per ASTM 2170 – worked and measured moisture levels

 

Read More »

 


VaporSolve® 100

VaporSolve® 100 is a low viscosity, hydrophobic resin system that cures on wet or damp concrete. It is used as a single coat remediation system or a top coat over VaporSolve™ Primer...

 

Read More »

 


VaporSolve® 100 LP

VaporSolve 100 LP is a specially formulated 100% solids epoxy coating designed to comply with ASTM F-3010 and is for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. When used without a primer in a single coat application, it is referred to as the VaporSolve Basic System.

 

Read More »

 


VaporSolve® Fresh Concrete

VaporSolve® FC (Fresh Concrete) is a specially formulated water-based epoxy for use over freshly poured concrete to act as a high performance concrete curing compound and as a primer under VaporSolve® 100 material. VaporSolve® FC has been formulated with very low viscosity and surface tension to ensure excellent substrate wetting, penetration and adhesion...

 

Read More »

 


VaporSolve® Joint Filler

VaporSolve® Joint Filler is a non-shrinking, semi-rigid epoxy paste used for filling joints and cracks in concrete that will receive VaporSolve® Systems. It resists long term moisture and alkalinity...

 

Read More »

 


VaporSolve® Primer

VaporSolve® Primer is a water-based epoxy material with deep penetration and adhesion to concrete. It has superior performance to 100% solids materials over contaminated concrete. This product eliminates or greatly reduces concrete outgassing...

 

Read More »

 


VaporSolve® Tie Coat

VaporSolve® Tie Coat is a two component, fast drying water-based epoxy formulated for use over non-porous surfaces such as APF's VaporSolve® Moisture Remediation Systems. It insures the adhesion of subsequently applied cementitious overlays...

 

Read More »