Products: Polyurethane

Polyurea 5000

Polyurea 5000 is a two-component, ultra high solids, aliphatic polyurea/polyaspartic hybrid. New, unique resin chemistry has provided the raw materials to formulate this coating, which gives it the desirable properties of polyester-polyurethane materials with greatly reduced odor and less film thickness limitations.

 

Read More »

 


Polyurea 5001

Polyurea 5001 is a two component, ultra high solids, aliphatic polyurea/polyaspartic hybrid. It is a pigmented material capable of obtaining excellent adhesion to dry, properly prepared concrete...

 

Read More »

 


Polyurea 5100

Polyurea 5100 is a 100% solids, two-component, aliphatic polyurea/polyaspartic hybrid. A unique resin chemistry has provided the raw materials to formulate this coating, which offers the desirable properties of polyester-polyurethane materials with virtually no odor and fewer film thickness limitations.

 

Read More »

 


Polyurethane 100

Polyurethane 100 is a two-component, high solids aliphatic polyurethane offering a remarkable combination of performance properties not found in other polymer coatings. It produces protective films which are hard, flexible and very impact resistant...

 

Read More »

 


Polyurethane 100 VOC

Polyurethane 100 VOC is a two-component, low-VOC high solids aliphatic polyurethane formulated to comply with California VOC regulations. This product offers a remarkable combination of performance properties not found in other polymer coatings...

 

Read More »

 


Polyurethane 250

All concrete sealers are not created equal. While solvent-born acrylic sealers may be the most commonly used sealer type, they are far from ideal, especially for projects with heavy foot traffic or for exterior applications. Poor wear characteristics, premature loss of gloss and water whitening issues plague contractors...

 

Read More »

 


Polyurethane 250 VOC

Polyurethane 250 is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of surfaces. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete...

 

Read More »

 


Polyurethane 325

Polyurethane 325 is a three component, high solids aliphatic moisture urethane. This product offers a remarkable combination of performance properties not found in other polymer coatings. Polyurethane 325 produces protective films which are hard, flexible and very impact resistant...

 

Read More »

 


Polyurethane 500

Polyurethane 500 is a two component, water- based aliphatic polyurethane that provides an excellent combination of high gloss, hardness, stain resistance and gloss retention under heavy foot traffic...

 

Read More »

 


Polyurethane 501

Polyurethane 501 is a high solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems. Polyurethane 501 meets the 50 grams per liter California VOC limits...

 

Read More »

 


Polyurethane 525 Primer

Polyurethane 525 Primer is a water-based two component polyurethane formulated for use when a rapid curing, high adhesive primer over concrete is required...

 

Read More »