 |
|
|
|
Architectural Concrete Sealers
Unlike plain conventional concrete,
architectural and decorative polymer
concrete is nearly always sealed with a
clear material. Sealing is done to protect
the decorative work, improve cleanability
and enhance the appearance.
|
Our Architectural Sealers Systems
For information on sealer selection or application
instructions for any of the following sealer systems, please
refer to our Sealer Selection & Application Guide.
APF Acryseal Sealer System
Used as a sealer over a wide variety of surfaces. Fast drying, low cost,
easy to use. Excellent adhesion to most cementitious surfaces.
Available in gloss or satin. Intensifies colors in decorative substrates.
Moderate performance in high foot traffic or vehicle areas. This system
will give the concrete a wet look.
Polyurethane 250 Sealer System
Two-component, solvent based primer/sealer for use over all
architectural concrete surfaces – especially effective over acid stains.
Outstanding adhesion to challenging surfaces including minimally
profiled concrete and fully cured polyester-urethanes. Compared to
solvent acrylic sealers, gives superior gloss, exterior gloss retention,
cleanability and wear resistance. This system will give the concrete a
wet look.
Poly 250 / Poly 100 Sealer System
Two-component, solvent based primer with a two-component high
solids solvent based aliphatic polyurethane. Suitable for use over all
types of architectural concrete surfaces. It provides superior chemical
and abrasion resistance. This system has a long track record of
success in high traffic commercial applications such as casinos,
restaurants and retail establishments. This system will give the
concrete a wet look.
Epoxy 200 / Poly 501 Sealer System
Two-component, water-based, epoxy primer with two component high
performance water-based polyurethane. Suitable for interior
architectural concrete where a water-based low odor coating with
superior chemical and abrasion resistance is required. This system
will give only slight color enhancement of the concrete.
Epoxy 200 / Poly 500 Sealer System
Two-component, water-based epoxy primer with a two component
water-based polyurethane. Suitable for interior architectural concrete
where a water based low odor coating with a quick cure and good
chemical and abrasion resistance is required. This system will give
only slight color enhancement of the concrete.
Epoxy 400 / Poly 100 Sealer System
Two-component 100% solids epoxy primer with a two-component high
solids solvent based aliphatic polyurethane. Suitable for interior
architectural concrete where a high build chemical and abrasion
resistance sealer is required. This system will substantially darken
the color of the concrete.
Epoxy 400 / Poly 501 Sealer System
Two-component 100% solids epoxy primer with a two-component high
performance water based aliphatic polyurethane. Suitable for interior
architectural concrete where a high build chemical and abrasion
resistance sealer is required. This system will substantially darken
the color of the concrete.
Epoxy 400 / Polyurea 5000 Sealer System
Two-component 100% solids epoxy primer with a two-component high
solids aliphatic Polyaspartic Polyurea. Suitable for interior architectural
concrete where a high build rapid cure, chemical and abrasion
resistance sealer is required. This system will substantially darken the
color of the concrete.
Aqua Prime / Poly 500 Sealer System
Single component acrylic primer with a two component water-based
polyurethane. Suitable for interior and exterior architectural concrete
where a water-based low odor coating with a quick cure and good
chemical and abrasion resistance is required. This system will give
no color enhancement of the concrete.
Aqua Prime / Poly 501 Sealer System
Single component acrylic primer with a two component high performance
water-based polyurethane. Suitable for interior and exterior architectural
concrete where a water-based low odor coating with superior chemical
and abrasion resistance is required. This system will give no color
enhancement of the concrete.
|
|
Features & Tools
 |
Twitter!
Follow APF on Twitter! |
|
 |
Facebook
Become a Fan of APF |
|
 |
Online technical assistance.
Available during APF business hours;
Monday – Friday, 8:00 a.m. – 5:00 p.m.
|
|
 |
Project Estimator
Estimate your material needs |
|
 |
Systems Guide
Determine which system is right for your project |
|
 |
Newsletter & Mailing List
Sign-up today to receive the latest news and promotional offers |
|
|
 |
|
|
|
