Tough-Seal WB 501GREEN SYSTEM
Tough-Seal WB 501 sealer system is designed for use over interior conventional and architectural concrete surfaces. This system consists of a fast-curing, two-component water-based epoxy primer and a finish coat of a high-performance, two-component water-based polyurethane coating. It is an excellent choice when a low odor, high-performance sealer system is required.
With respects to chemical and abrasion resistance, it is equal to or superior to other commercial solvent-based systems on the market today. Tough-Seal WB 501 will produce only a slight darkening of the substrate to which it is applied, making it ideal for applications where the traditional “color pop” or “wet look” of a solvent system is not desired. Due to its high level of chemical resistance, it is ideal for automotive areas. Additionally, it has tire stain resistance equal to conventional solvent-based polyurethane systems. A low-VOC formulation is available.
Tough-Seal WB 501 System Data Sheet
Tough-Seal WB 501 System Specifications
PrimerEpoxy 200 Learn More »
Epoxy 200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete...
TopcoatPolyurethane 501 Learn More »
Polyurethane 501 is a high solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems. Polyurethane 501 meets the 50 grams per liter California VOC limits...